Concrete driveways in Temple, TX
New driveways, tear-out and replacement, extensions and parking pads for homes across Temple, Belton and Salado.
Quick answer: how much is a concrete driveway in Temple, TX?
Published Texas data puts a 4-inch reinforced concrete driveway at about $5.44 to $9.38 per square foot installed, or roughly $3,100 to $5,400 for a 24 x 24 ft two-car driveway. Removing an old driveway, extra dirt work, thicker 5 to 6 inch slabs and decorative finishes raise the price. A contractor confirms the number after a site visit.
Last reviewed October 23, 2026. Prices and code notes are general guidance; your contractor confirms them on site.
What's included
- New driveways for new builds and gravel-to-concrete upgrades
- Removal and haul-off of cracked concrete or asphalt
- Driveway extensions, side pads and RV or boat parking
- Broom, exposed-aggregate or stamped borders
- Approach and curb-cut work coordinated with City of Temple requirements
A typical residential driveway here is poured 4 to 5 inches thick, with thicker edges or more steel where heavy trucks or trailers will park.
What affects driveway cost in Temple
Every driveway is priced after a site visit. These are the factors that move the number most.
Size and thickness
Square footage sets the concrete volume; going from 4 to 5 inches adds roughly 25% more concrete.
Tear-out
Breaking up and hauling away an old driveway adds labor and disposal cost.
Dirt work and slope
Lots that need fill, cutting or retaining at the edge take more prep time.
Finish
Broom finish is the baseline; stamped or decorative borders add cost per square foot.
Steel
Rebar grids cost more than wire mesh but resist clay movement better.
Access
Tight access may need a pump or extra hand work to place concrete.
Concrete Driveway FAQ
How long before I can drive on a new driveway?
Foot traffic is usually fine after a day or two. Most contractors recommend waiting about 7 days for passenger cars and longer for heavy trucks or trailers, since concrete keeps gaining strength for about 28 days.
Why do Temple driveways crack?
Mostly from clay soil movement, thin slabs, missing reinforcement or joints spaced too far apart. Proper base, steel and joint layout greatly reduce random cracking.
Do I need a permit for a driveway in Temple?
The City of Temple lists flatwork, driveways and approaches as a permit category, and new approaches or curb cuts in the right-of-way are the most likely to need approval. Call City of Temple Building Permits & Inspections at 254-298-5640 or have the contractor pull the permit. Outside city limits, Bell County handles driveway culvert sizing for county roads.
How much does a two-car concrete driveway cost in Temple?
Using published Texas averages of $5.44 to $9.38 per square foot for a 4-inch reinforced slab, a 24 x 24 ft (576 sq ft) driveway is roughly $3,100 to $5,400. A 6-inch slab for trucks or trailers runs about $6.88 to $11.44 per square foot, or about $4,000 to $6,600 for the same size. Tear-out, dirt work and decorative finishes are extra.
Cost and code figures come from ProMatcher, HomeGuide, CostKit and the City of Temple. See the full Temple concrete cost guide.
Get a free concrete driveway quote
Tell us what you're planning. Your request goes to a local concrete crew that works in Temple and Bell County, and they'll follow up to schedule a look at the site and give you a written price.
- One contractor, not a bidding war of five callers
- Site visit before a final price
- No cost or obligation for the quote